The JL-WP series is a battery-powered electric work positioner — a compact mast lift with adjustable fork tines designed to raise light loads (100–200 kg) to exact working height. The problem it solves is repetitive awkward lifting: parts bins pulled from low shelves, component trays carried at waist height, product set down at floor level that the assembler then has to crouch over for the next hour. The JL-WP lifts those loads electrically and holds them at the right height so the operator works at a neutral posture.
The fork width is adjustable from 200 to 520 mm — wide enough for most small platforms and bins, narrow enough to fit in close quarters. The standard platform is a 605 × 475 mm PVC pad; the forks work without it for bare parts or bins with their own base. Lift speed is 55 mm/s via a DC motor on a 24V / 10 Ah battery. An onboard charger plugs into standard wall power — no separate charging station required.
Three variants, two heights
The ES100 (JL-WP 100) at 100 kg capacity lifts 1,700 mm — the tallest of the three, suited for applications where the load needs to reach shelf height or overhead. The ES150 and ES200 at 150 and 200 kg both max at 1,500 mm — same working-height reach for most bench and assembly applications but with more load capacity. The minimum height on all three is 130 mm standard (85 mm optional).
Rear steering castors and brake
Four castors — two fixed front and two rear steering — give the unit good directional control in aisles. The rear castors include a brake. A handheld UP/DOWN control pendant is standard; integral brake unit is available at order.
3/4 view
EN 1757 · EN 1175-1 · 24V · ADJUSTABLE FORKS